SteveF Posted May 24, 2011 Report Share Posted May 24, 2011 Hi All, on my `73 TR6 there are two wires running to the starter motor solonoid, one is white with a red trace as per the wiring diagram and presumably goes back to the ignition switch and the other (thinner) wire is white with a yellow trace. According to the wiring diagram there should also be two brown wires, one to the ammeter and the other to a connector block. No mention of a white/yellow wire!! Can anyone shed any light on this? Thanks, Steve. Quote Link to post Share on other sites
rpurchon Posted May 24, 2011 Report Share Posted May 24, 2011 Hi All, on my `73 TR6 there are two wires running to the starter motor solonoid, one is white with a red trace as per the wiring diagram and presumably goes back to the ignition switch and the other (thinner) wire is white with a yellow trace. According to the wiring diagram there should also be two brown wires, one to the ammeter and the other to a connector block. No mention of a white/yellow wire!! Can anyone shed any light on this? Thanks, Steve. white and yellow goes to the coil.and it would originaly have had a ballast wire also on coil. richard Quote Link to post Share on other sites
wheeler Posted May 26, 2011 Report Share Posted May 26, 2011 Steve Wiring diagram for '73 TR6 in pdf form here http://www.advanceautowire.com/tr2506.pdf shows clearly white/yellow wire and pink/white ballast resistor wire. please note these are for US spec cars but starter circuit should be the same. Cheers Bill Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.