nigel kennedy Posted August 6, 2010 Report Share Posted August 6, 2010 I plan to fit the Moss kit with twin webers so two questions. Firstly if I want to fit a brake servo where do I take the vacuum from? secondly the rocker cover has a breather which fed into the intake manifold, where should this go now? catch tank? Quote Link to post Share on other sites
TR 2100 Posted August 6, 2010 Report Share Posted August 6, 2010 (edited) I plan to fit the Moss kit with twin webers so two questions. Firstly if I want to fit a brake servo where do I take the vacuum from? secondly the rocker cover has a breather which fed into the intake manifold, where should this go now? catch tank? Hi Nigel, A catch tank is one solution - my solution shown in photo below. (don't be fooled by the reflection of the pipes in the air filters) Much neater - but then I'm biased! Can't help you with the brake servo - don't like them. Too messy. I'm sure you can drill a suitable hole in the weber manifold but I don't know how much this would affect the webers. AlanR Edited August 6, 2010 by TR 2100 Quote Link to post Share on other sites
badshead Posted August 10, 2010 Report Share Posted August 10, 2010 I'm also thinking about fitting a brake servo. Fitting a T or Y adaptor with hose tails to the existing manifold vacuum take-off should be a straightforward way of fitting the brake servo hose and crankcase breather, but I'm not sure what size/thread adaptor to get. Can anybody advise me, I'm guessing it's something like 5/8 BSP but the original adaptor isn't listed in the spares catalogue. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.