Jump to content

Recommended Posts

Assuming it's the original then it will be an A type with O/D on 2,3 &4. The way to tell is if the O/D solenoid is vertical it's an A type, if Horizontal a J. Hope this helps. :rolleyes:

Link to post
Share on other sites

Unless of course it wasnt fitted with an o/d! ;)

But if both boxes are original non o/d units they should be the same anyway!!

Quite a few MB numbered 'A' type boxes from saloons were fitted as replacements in later years,and the solenoid on them is horizontal like a 'J' type!

All 'A' type o/d boxes will have a 6cm "ish" diameter notched round brass drain plug on them!!

Link to post
Share on other sites
Unless of course it wasnt fitted with an o/d! ;)

But if both boxes are original non o/d units they should be the same anyway!!

Quite a few MB numbered 'A' type boxes from saloons were fitted as replacements in later years,and the solenoid on them is horizontal like a 'J' type!

All 'A' type o/d boxes will have a 6cm "ish" diameter notched round brass drain plug on them!!

 

 

Ah yes!! you're right there! Carry on!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.