davidgsmith Posted June 8, 2008 Report Share Posted June 8, 2008 Looking at different options regarding my engine rebuild and wanted to know if anyone has experience, and/or opinions on whether this is a good option to go for. Thanks Quote Link to post Share on other sites
TR&Morgan Posted June 12, 2008 Report Share Posted June 12, 2008 Looking at different options regarding my engine rebuild and wanted to know if anyone has experience, and/or opinions on whether this is a good option to go for.Thanks I recently rebuilt a TR4 engine that had the split seal conversion already done to it. I wasn't impressed. It is rather difficult to determine if you have the seal centered on the crankshaft during assesmbly. Given the choice, I would go with the stock reverse scroll device. I have done plenty of the stock ones and they may drip a drop or two, but it is pretty fool proof. Good luck with your rebuild! Quote Link to post Share on other sites
davidgsmith Posted June 14, 2008 Author Report Share Posted June 14, 2008 Thanks for that. I seem to be getting a varied response to this, slightly in favour of NOT fitting the seal. Looks like I won't bother with it and hope that the guy that rebuilds my engine will do a good enough job without it. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.