[TR6...electrical: turn signals]

Is the alternator belt slipping? check and adjust maybe? Nick

[efi]

Thanks I will have a look for the magazine and may be speak to Dave at Emerald Nick

[efi]

Thanks Markus I will try that, Nick

[efi]

Hi Folks Does anyone have a good starting point ignition map for the Emerald ecu for a 150 bhp engine using converted Triumph throttle bodies? Thanks Nick

[Wet underlay.]

my tr used to leak through the joints each side of the rear quarter deck, there is a large blob of filler on the under side, water would run down behind trim over rear wheel arch and soak the under felt. Hope that helps.

[any one have experiance of tr6 electronic fuel injection]

hello all

 

any one out there in tr6 land have experiance of fitting electronic fuel injection and managment system in particular emerald to a pi tr6

regards gary bograt. if no one has done this i'm about to undertake this. can keep you all informed if you want

 

Hi Gary I used the parts from Emerald,I used the trigger wheel as a template to cut in to the pulley direct.I used early pi manifolds with

original butterflies. The front one now has a spindle with D shape sticking out to the front of engine with with bracket and pot fitted.

Ive fitted a tech edge wb Lambda sensor to rear box so it can be run in closed loop or adaptive modes.I have a coil pack and no distributor.

just some work to do with maps. Good luck Nick

[any one have experiance of tr6 electronic fuel injection]

hello all

 

any one out there in tr6 land have experiance of fitting electronic fuel injection and managment system in particular emerald to a pi tr6

regards gary bograt. if no one has done this i'm about to undertake this. can keep you all informed if you want