glasgow4a
-
Content Count
158 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by glasgow4a
-
-
I asked a question about bulkhead fitting 611043 in stainless steel on Sunday. I am disappointed to note i have had no replies. I have now checked with Moss to find it is NCA, cheers Ian.
-
Paul, where did you purchase the bulkhead fitting 611043 in stainless steel, thanks Ian.
-
Strip carefully using a hot air gun and for the curved sections use a shavehook best of luck Ian.
-
Try Willow Triumph at Heighington nr Darlington on 01325 313033 no connection good website and has done TR4/4A plus TR6 in the past. cheers Ian.
-
Can recommend Vintage Chrome near Carlistle, 01228 792661 had my 4a rear bumper done very impressed.
-
Cal you have a PM cheers Ian.
-
Chris you have PM, cheers Ian.
-
I used BRT bearings for fronts available nationwide part no BRT 298 NTN BEARINGS. cheers Ian.
-
Spare lids are available from Tool Connection in Southam Warwickshire 01926 815000 who supplied me with one for my 4a. cheers Ian.
-
Had a similar problem recently, turned out it was the choke cable not opening fully. Took it out lubricated it engine started right away, good luck Ian.
-
Happy birthday Roger, same age as me now 1949 was a very good year.
-
On Quest channel last night shed and buried red TR5 NAM 100G any info cheers Ian.
-
Lovely car conrad clem did you proud, enjoy. All the best from rainey Glasgow, cheers Ian.
-
I used BRT Bearings part no BRT 298, These are NTN Bearings and available nationally, cheers Ian.
-
Stub axle stiffening mod? please explain cheers Ian.
-
I have also done this job as per Stuarts description, rebuild completed 2015 with no problems since cheers Ian.
-
King Dick tools are still in business had a stand at Practical Classics show at the NEC. cheers ian
-
As discussed earlier make your own penetrating oil, 50% Acetone 50% ATF. works well cheers Ian.
-
Best of luck with JDO Instruments. I used Speedograph Richfield in Nottingham, good service, good price, speedo working perfectly, cheers Ian.
-
Make your own 50% ATF and 50% Acetone, works very well, cheers Ian.
-
Buy a gallon of Milkstone Remover from a farm supplier much the same as Jenolite [phosphoric acid based] but a lot cheaper!
-
That looks like a TR5 bonnet cheers Ian.
-
Roger, myself and all my mates would like to see the back of Nicola Kranky. We voted to stay in the union and hope their is no Indiref 2. Do not believe that all Scots vote SNP that is definately not the case, cheers Ian.
-
Just received my high torque starter back from Wosperformance, repaired and sent back FOC excellent and generous service strongly recommend cheers Ian.
Fuel leak at rubber/copper join
in TR4/4A Forum
Posted
Thanks to all who replied to my post, [ will wait until hopefully they become available here, cheers Ian.