parky
-
Content Count
85 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by parky
-
-
Thank Ian that would be great.
parky
-
Help required in fitting a new Tonneau cover , details of fittings and places to fit
Parky
-
I have just carried out the same thing as you.
The hand brake is not self adjusting, but the rear brakes are. You will need to adjust the hand brake cables to make the hand brake work. If you have a manual it gives all the details their, but it takes time to get it right.
Parky
-
Thank you for your ideas, I shall get onto that tomorrow.
Parky
-
I have a small problem, when I turn my lights on the battery indicator drops and the temp gauge goes into the red.
I have checked the alternator output at 2540 rpm and it shows 14.51 volts.
Every thing else works fine.
Any ideas please.
Parky
-
Thanks will check tomorrow.
-
Had my TR7 out in the dark for the first time and found that I had no dash board lights. Any ideas!!!!
-
Thanks Mick, just bought mine for the Saturday.
Parky Camb Followers
-
I have just bought a TR7 fitted with a Rimmers MK 3 body kit. Is there another on in the register?.
I am also looking a fitting a set of Alloy wheels to it, whats the best size.
-
Hi Jayhawks,
You will need to contact you local group the details are on the forum, they should be able to help you.
Good luck.
Parky
-
Hi George,
I have an electric taco which you could wire in to check the RPM.My TR6 was 600 rpm out.
Parky.
-
I have had one of CJs scissor lifts for some time, I modified it to fit the TR6 and put two small wheels in it so I can store it standing up.
Great bit of kit.
Parky
-
Hi Neal,
Try TRGB at Somersham, tel number in TRA.
Parky
-
Article in this weeks CCW, says that these devices can be made up for less than £5-00 !. What chance do we have, if they want the car they will get it. There is always some one ahead of the game.
Parky
-
You can not be serious!!!!!!!!!!
Parky
-
Does any one know of a company that repaires capillary gauges.
Thanks.
Parky
-
Where's the Third door ?
-
I have an invoice for a 2 Ltre Lagonda Engine Rebuild in 1957, total cost including removing and refitting engine, road test, and 15 gallons of fuel at £4-5-7.
£99-19-8. What cost now.
-
I dont know what I am going to do, no tax disc! it will ruin my collection. I even have one for March 30 2012.
It means more space on the windscreen for other things.
Parky
-
Hi Richard,
I had a repair done on my cap last year and that had worn the cap quite a bit.
Contact Scott Helms at sportycars@britishcarweek.org. he does a very good job and it might save you some money.
Parky
-
Hi Sean,
Try Rust Buster, Chestnut Farm House, Main Rd, Hop Pole, Spalding. PE11 3HH.
Sorry I dont have a tel no for them. they do all sorts of paint.
Parky
-
Hi Ernie,
I think your settings are a bit high, try 4 on the rear and 6 on the front.
Parky.
-
Looks a bit of a mess Andrew, hope you can get it fixed, before your trip.
Parky
-
Hi Andrew,
If you look in Bill Piggott's TR6 book there is a photo of a TR6 tool kit.
Parky
Tonneau cover fitting
in TR7/8 Forum
Posted
Thank you Ian, all I have to do now is get it fitted.
parky