tr8coupe
-
Content Count
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by tr8coupe
-
-
Hi Gilberto,
Nothing new there, then - like pump, like battery.
Bosch is bosh . . .
Ruckwarts durch technik !
Cheers,
Alec
thanks Alec on correction lol
last battery cost £90.00 and lasted 10 years
new one 4 months ago cost £25.00 + vat (faulty after only 4 months)
are we going down on price and back on technology as i was told the new batteries have to be fully charged at all times other ways they go bad ?
nice thing is costco gives 3 years on them things lol
happy
tr8ing
-
thanks guys sorted
bosch battery was faulty and was only 4 months old
-
voltage is nothing without amps, if you have access to an ameter (sp) it may be worth checking how many amps the alternator is pumping out and how many it should be!
alternator is brand new and puting out 80 amps
battery is new and i suspect is not taking charging to the max so going to costco as the warrantie still on 3 years
this on a 4.8 litre John Eales engine lol
thanks
Gilberto
-
Hi,
I would suspect that the alternator is at fault, and not capable of supplying enough current to sustain the lights.
This drains the battery voltage to a level where there is not enough to excite the alternator into charging.
The new battery will have 12v and the alternator will behave as normal until the battery voltage falls below the threshold again.
Jim
thanks Jim
alternator is new and tested 14.43 volts puting out but once you put lights on after a short run goes back to
battery voltage 11.99 to 12.45 volts switch off lights and battery will not recuperate neither the alternator will go back to 14.43 volts?
could be a short on elctric motors for the lights ?
thanks
Gilberto
-
My tr8 has a problem with the charging system,
when driven with the lights off ok
with lights on battery is not charging
and funny thing is after lights off again battery goes bad and will refuse charging till i change to another battery ?
charging is ok as long the lights are never turned on !
any ideas on how to solve ?
should i change head light switch ?
thanks
Gilberto
-
get a mallory unilite
fantastic more power and reliable
tr8 man
-
Hi all, I saw this car on ebay Item No 4631237240
It has had an interesting rear light conversion which I thought looked quite attractive, I just wondered if anyone else has tried something similar or knows how to go about it. Not a fan of body kits but the lights are quite neat & something different.
David.
seen those lights on a forklift before
happy
tr8ing
-
carter is one of the best for rover v8 and reliable
paid 45 pounds for mine with brakets from Real Steel
-
John they sound better with a single large bore exhaust lol
-
A couple of pictures of my car at Santapod in the last RWYB. PICS.
Unlike the last drag run at Elvington I had terrible traction problems though so no impressive quarter times. Much lower rear tyre pressures next time, but anyone got any other traction tips??
launch control what you need
-
-
nice coupe shell in primer no rust and no sunroof
open to offers
-
you can have 9 inch at the back with splitrims
under the arches lol
-
just surf ebay por tr7 springs
happy
tr8ing
-
i believe quaife has a close ratio set for r380 not sure for lt77 as u need to use the original gearbox?
-
just get one t5 with bellhousing from this guy very cheap
http://www.bellhillgarage.co.uk/
u just need to drill 2 new holes to bring rear mount a bit to rear ,dump tr7 ruber mount and get a chevy race one £20.00
bolts ok to tr7 gearbox cross menber and get a proper prop from repcoprop to take all that torque
just use a tvr one griffith 500 or other
happy
tr8ing
-
weber all the way more power and no flat spots and edelbrock performer straight way more power than offenhauser
happy
tr8ing
-
just get a t5 from a tvr breakers
a fantastic gearbox and close ratio fits straight in
-
ex works tr7 v8 at Goodwood
-
any one has a 3.45 for sale?
-
front 205/50/15 30 psi
rear 225/50/15 30 psi
split-rims compomotive cx 7 front 8 at the rear ::
happy
tr8ing
-
GOT 30 PSI ON MY V8
-
:blues: just add a drag link and no more twist on the axle
happy
tr8ing
-
hi guys
got loads of clips tr7/8
how can we post them???
happy
tr8ing
Grinnall Register
in TR7/8 Forum
Posted · Edited by tr8coupe
here is mine