Opv
-
Content Count
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Opv
-
-
Hi All
I'm going to advertise my TR3A for sale in the near future if anyone is looking for a immaculate car get in touch
Charlie
-
Lovely looking car
-
Your car looks class as it is, love the colour. You need to buy a restoration project and just enjoy your tr2
Charlie
-
Hi All
Thanks for all your help the problem is now sorted, it turned out to be a bad earth. The car was fine the day before and I held the solenoid to see how tight it was and it seemed ok but I just tweaked the screws holding it and low and behold it was fine lol. Again thanks
Charlie
-
Thanks Fellas
I definitely have power from the red and white cable I put a test lamp across jt and pressed the starter, I'll check the earth tomorrow
Charlie
-
Thanks Fellas
I definitely have power from the red and white cable I put a test lamp across jt and pressed the starter, I'll check the earth tomorrow
Charlie
-
Hi All
Need help again, not been my week. The car was fine yesterday however when I came to start it today there was nothing at all from the starter button. The car will start fine using the button on the solenoid, theres power on the starter button and power right through to the solenoid. Is it possible for the solenoid to be faulty where it will work from the solenoid button but not the starter button
Thanks Charlie
-
Thanks Neil the one i have is different lol so I'll get one ordered really appreciate all your help
Charlie
-
Hi Stuart
Thanks for that the reason I asked for the dimensions is I have found a spring in a box of bits I got with the car and I'm not sure it that's the one
Probably easier to just order one and be done with it lol
Cheers
Charlie
-
Hi Neil
I'm sorry for being such a pain but is there any chance you could send me the dimensions of the spring ie the length and the diameter
Thanks
Charlie
-
Cheers Neil
I'll check tomorrow but this certainly looks like the issue much appreciated
Charlie
-
Hi Neil
Is there a bracket on the bulkhead fot the spring to attach to if so it looks like that is missing also
Charlie
-
Hi Neil
I've just checked mine and the spring is missing I can see the hole in the arm item 13 where the spring goes but can't see where on the bulkhead the other end fits
Thanks Charlie
-
Hi Neil
Again thanks and off the top of my head I think I may also be missing that spring I'll check it out
-
Thanks Richard I'll check that out
-
Hi
Thanks for getting back the choke fast idle screw is backed off also but i will look into the linkages
Cheers
Charlie
-
Hi All
I have an issue with the tick over on my tr3, its a little fast, on inspection both tick over adjusting screws are backed right off, I also found if I place my foot under the throttle pedal I can lift the pedal up about 60mm and if I put a little pressure on it the revs drop slightly is this normal.
Any info would be greatly appreciated
Thanks Charlie
-
No worries Colin anytime you want to check something just let me know its no problem would like to see your car
-
Hi Colin
The mobile number you sent apparently isn't recognised ive pm'ed you my number
Charlie
-
Ok that's fine
Charlie
-
Hi Colin
I have a tr3a you can photo anytime I'm just along the road in sedgefield
Charlie
-
Thanks for getting back it looks like Penrite GB40 it is
Charlie
-
Hi All
Going to be changing the gearbox oil soon and just wondered what oil people are using
Thanks Charlie
-
Hi Rob
Thanks for that the oil level is ok but will definitely check clutch adjustment
TR3A
in TR2/3/3A/3B Forum
Posted
Cars now sold
Regards