PeterTRR
-
Content Count
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by PeterTRR
-
-
Looking for the above lid in fairly good condition ( no catty ).
Peter.
-
Do you still have the mig welder my sons after onr to learn .
Thanks Peter
-
Also looking for a good set off back wings can anyone help.
Thanks .
-
Looking for any rear wings for sale TR2/3.
Thanks.
-
My car at the moment is on Strongbergs.
-
I would like to change over from a manuel to electric pump looking for reccomendations please.
Thanks Peter.
-
Does anyone have a left hand thread tap and die 1/2" UNF x 20 that can buy or borrow, i only need it for a short time.
Peter TR.
-
Phil
Just confirming i want the hard top as per our telephone conversation.
Thank you
John.
-
Looking for tr 3 bonnet as above at a fair price.
Peter.
-
-
Thank you for all the information the car is a TR6 late 68 / early 69 ,i tried to fit an 18 amp on and it set fire to the ignition switch and the coil wire on the fuse side i then put the ordinary alternator back on renewed the wire and put a new switch on.
Peter.
-
Further to the question regarding amp meters if i read your query correct , do you disconnect the two wires at the back off the amp meter and connect them together .2nd question how do you connect the vault meter into the wiring,does that then mean you can put a bigger alternator in the car.
Thank you
Peter.
-
Need recommendations for a j type gear box i have been looking at Morris Golden Film AG90 any thoughts.
Thanks Peter.
-
Need a good pair off bonnet hinges
A J Type solenoid.
Thanks Peter.
-
I bought my battery at Eurocarparts it was a Bosch with 3yrs warranty you can order online.
John.
-
Wanted does anybody have a rear window for a TR3 hardtop for sale.
Thank you
John.
-
These part numbers i am looking for--12,19,21,and 30 also roof bars/
John.
-
Does anyone have parts for TR3 roof back window etc.
John.
-
Thanks for your information.
John.
-
Question the brass hinges on the doors are they painted to the colour off the car or left brass.
Thanks John.
-
I am looking for a perspect rear windscreen .
John.
-
Steve
Regarding your problem i had the same issue last year,the cause was the alternator it even burnt the wire to the distributor at the fuse box.
John.
-
23 hours ago, james christie said:
I have mine on the long bolt holding the body to the chassis just behind each seat. For added safety I have added a nut
James
Thanks for your reply is it at all possible to send a photograph of the back mounting .
John
-
I have a set off Stanpart static seat belts ,i have one fitting on top off the wheel arch another on the prop shaft tunnel i just dont know where the third goes.can anyone help.
John.
Tr/3 Boot Lid
in TR2/3/3A/3B Forum
Posted
I am after the TR2 type with the centre lock and 2 budget locks.
I live in the North East.