AlanG
-
Content Count
468 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by AlanG
-
-
Thanks people.
I'm hoping for a "quick fix" rather than a back to metal respray but will complete one panel first to see how it turns out. I'm not a concours type of person just want a presentable TR4A for lots of summer use. Car is very sound with virtually no rust. Just looks a bit tired, paint and trim wise.
Alan.
-
Thanks Al. Most appreciated.
Alan.
-
The vinyl facing of the interior trim is in reasonable condition but the backing mill board has warped. So I thought I would remove the vinyl facing and glue it to new mill board. Is this feasable and can anyone who has done this offer any advice.
Thanks, Alan.
-
Just removing all the bits and pieces before repainting. Not sure how to remove the wing and door chome mouldings without damage. Are they prised off or do they slide of their fixing clips? Or maybe some other way?
Alan.
-
Just got a pair of leather Mk1 MX5 seats to fit in my 4A. As the drivers side is more worn than the passengers is there any reason they can't be swopped over? Also did anyone who has fitted these seats experience any problems worth mentioning? Any advice appreciated.
Alan.
-
Looks great Al. I'll do mine in a few weeks.
Alan.
-
-
Mine has a some discolouration around the instrument hole cutouts and dash edges. Is this in the veneer or the varnish and will stripping and sanding get rid of it?
Alan.
-
Hello to you all. My first post since acquiring a TR a few weeks ago after a 46 year gap in TR ownership. So he goes.
My TR4A is a non O/D car but with it came an additional TR6 J type O/D gearbox.
When I eventually fit it should I include a relay in the wiring. The majority of opinions seem to be not. I think mainly based on the fact that the OEM TR6 installation did not include one.
Just wondered if that was considered correct?
Autosparks list O/D wiring harnesses both with and without a relay.
Alan.
Mystery Wood Bits
in TR4/4A Forum
Posted
These two pieces of wood are jammed really tight in the scuttle vent. I've no idea why they are there but I am reluctant to remove them in case the front end falls off!! There is a fairly loud buzz/rattle from this area when driving so maybe it's an attempt to stop it. If so it ain't worked. The buzz/rattle occurs with the flap open or closed. Anyone any idea what the wood maybe for and what could be the cause of the buzz/rattle?
Alan.