Red Leader
-
Content Count
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Red Leader
-
-
The air gap should be no less than 1mm (0.025"),
Hello Marvmul.
I always thought 1mm was 0.03937"
-
Check the quality of the crimp joints on all the 12 volt spade terminals to and from the coil and distributor. I chased a similar problem around for ages, then when a friend suggested this it cured it in an instant
Engine running too fast and then stalling
in TR6 Forum
Posted
Hello George,
First of all don't touch anything that you have not just changed ie the PRV or the Ignition system, as that should have no impact on the problemand may cause even more.
I would suggest that you reset the butterflies first, using a fairly inexpensive airflow gauge like the ones people use for balancing twin carbs.
Then bleed all the injectors in the way previously described. I air has got into the system it will take some time to get it all out. you may have to bleed it several times before you get it all out
regards