Rktr4a
-
Content Count
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Rktr4a
-
-
Hi Chris ,
sounds like a better alternative, I assume that you didn't need to put reinforcing
pressings on your panel due to thicker steel?
-
Hi Chris,
Did you make a pattern panel for this yourself?
-
Hi all ,
My chassis lower t shirt - breastplate panel is out of shape and has some rust evident and I want to replace with new.
Do I have to brace surrounding chassis members before I cut out? Or can I just cut out and replace.?
Regards Rob
-
Hi all ,
having stripped front hubs of old bearings a while back went to fit new and realised I’d deleleted reference photos by mistake.
can anyone provide correct fitting photos as manual is pretty vague as to what way tapered rollers face etc.
cheers Rob -
Sorry Rich,
my mistake, now it makes more sense . Thank you.
cheers Rob
-
-
Hi all,
currently restoring late 4a and unsure as to where exact position of brackets to strenghthen lower wishbone .
The car seems to have a plate already in position on the rear bracket on both sides , and all the photos I’ve seen don’t look the same as my car.
can anyone post photos of before and after fitting of strengthening brackets.
cheers Rob
-
Is the diagram for the 4a correct , should it not show a positive earth?
-
Hi all,
Anyone have pics of front chassis strengthening kit fitted on car, the restoration manual I have is pretty vague .
regards Rob
-
I have the rubber seal that goes between the two halves , just thought undo two bolts , fit new pistons and seals , job done .
Or am I missing something.
-
Hi all ,
Whilst renewing seals and pistons on calliper i later read that it is not advised to split them which i did????
why is this and now that I have done this how do I remedy ?
Any advice welcome
Regards Rob
-
Hi all , any suggestions on treating the inside of chassis for flaking and surface rust , I've just bought one of those cameras that can feed down cavities and after using this I have discovered said rust issue.
I've also bought a j type overdrive from a triumph 2500 tc and want to fit to my 67 4a any advice on this would be welcome ,
Regards Rob ????
-
Cheers Bob will give that a go ????
-
I'm removing and refurbishing as I go , so I've removed all of the dash , left the wooden one till later on in resto , but have derusted and painted metal dash , removed vents from these and repainted etc, clutch and brake assembly refurbed , but roger makes an interesting point I have s new dash top to be fitted and was looking and think window frame has to come out to do this? if so I may remove top of chamber panel as suggested , also was considering removing vent flap on outside of bulkhead but don't have any directions in any of my manuals as how to do this .
Thanks for all advice Rob ????
-
Hi all,
After removing dash, heater etc noticed surface rust inside plenum chamber , any tips on best way to eradicate , looks like access is restricted
Cheers Rob
-
Hi all,
Looking to buy new outer sills for my 67 tr4a.
With all the varied suppliers , in your opinion who's are the best I.e fit quality ,value etc ,
Regards Rob????
-
Hi all,
Can anyone advise me regarding fitting new lamp housings.According to Roger Willams restoration manual they should be fitted inside the inner wing. My cars ones were fitted outside and I believe that was original from the factory. Can anyone advise .The reason I need to know is that I'm trying to new rear inner wing rear deck and the two panels at the front and rear of the rear deck and want everything to line up with new outer wing when offered up.Do all these parts "hook " over inner wing or are they fitted to the inner lip...? Any advice welcome and maybe photos of this area.
Cheers Rob
-
Thanks Stuart,
All the best ,Rob
-
Hi all,
Have just removed old door skin and am proceeding to clean up frame,prime ,paint etc.
Small problem I have is there are still remnants of the old skin at both end of the frame at the top which create the width for the glass channel.The question is do I grind these off and if I do I'm not sure how to replicate as the new skin doesn't have these on .
Advise please .
Cheers Rob
-
Tr4a JSG 43E red registered in Edinburgh any info previous owners?
-
Thanks guys
-
Hi Caroline,Rob here from sunny Scotland ,
In my opinion your basic car ,ie resto project complete to restore 3-5 k£ add in surrey top and Atype overdive in my opinion your looking at 5-7k .hope this gives some direction .
Godspeed speak soon and all that Rob
-
Hi, I'm looking for some images of the b post area please so I can see how all the related parts look once finished.Up close pics with the door open and closed would also be helpful.
Regards Rob.
-
Ok thanks for the help everyone.
Regards Rob.
Lower t shirt panel
in TR4/4A Forum
Posted
That's great guys thanks for all the advice
regards Rob