Lynx Posted January 28, 2016 Author Report Share Posted January 28, 2016 Thanks all for your continuing support with helpful comments. Rocker shaft is clean and all rockers slide nicely back and forth. I haven't over-revved the engine; honestly. The oil pressure was fine during this episode; almost 60lbs at 1000 - 1500 RPM and a little under 50lb shot idle. I think the bearings are fine. I've secured the liners with large washers, tube and nut &c. A quick check showed liners .003" proud; didn't check in 4 places though. I'll clean up and try and get some more accurate measurements. As you say figure of 8 gaskets might be damaged. Thanks again to all Andrew Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.