Collection of over 30 spares and parts for TR6, being sold as a job lot at a fraction of there list price as the car has since been sold. List of part are: Rear suspension bracket support inner 3 notch,
6 x Front suspension bracket shim to chassis,
2 x Track rod end with grease nipple,
Tie rod (steering arm) RH,
Throttle breather to brake servo,
Hose demister 13.5 x 1.1/2 Dia.,
3 x Chrome wheel nut,
3 x rubber cover for rear bulb holders,
Push Rod Assembly, clutch master cylinder,
Master cylinder overhaul kit,
Washers lower front suspension (3/8" x 1-5/8") ,
Repair washer (7/16" x 1-3/8"),
Caliper repair kit,
Front hub castle nut,
4 x Pop rivets (1/4" x 1/8"),
Adjustable clutch slave cylinder push rod,
Front hub oil seal,
2 x Interior light switch,
2 x bulb socket single contact terminal Kit,
2 x rear bulb holder (twin) BA15D,
4 x rear bulb holder (single) BA15S,
7 x lengths of 3/16" fuel hose (1x400mm, 4x600mm & 2x700mm),
8 x No.6 chromed cup washers,
14 x 3/8" UNF thin nut,
Metal bodied brake light switch,
Two speed electric fan switch,
2 x red warning light,
1 x blue warning light,
Alternator plug,
4 x Clevis pin (5/16" x 11/16"),
6 x Clevis pin (5/16" x 13/16"),
14 x 1/4" UNF x1" bolt