TR4Tony VC Posted September 3, 2022 Report Share Posted September 3, 2022 Hi all Ive had a small run of longer handbrake levers made in the past and can get another run done in the next month or so if there is enough interest. High strength stainless lever which is 20mm longer than standard (the optimum length I’ve found for the cables that we can readily obtain for Tr2 through to TR6), waisted stainless pin shrunk into place so it won’t fall out, precision pin hole same size as clevis assembly so that the clevis doesn’t chatter so as good as I can do it. They obviate the need for the aluminium extender which is softer and tends to wear out and fir both the original Girling cylinder and the reproductions from TRW and others. As used on BST82B … so I know they do the job. Two levers as show work out at £60 a set. PM me please so that I can gauge interest - I need to be able to make a batch of minimum 50 pieces to make it viable. Link to post Share on other sites
iain Posted September 5, 2022 Report Share Posted September 5, 2022 Hi Tony ……and for the uninitiated the benefits are? Many thanks Iain Link to post Share on other sites
rcreweread Posted September 5, 2022 Report Share Posted September 5, 2022 Tony - have sent you an email Cheers Rich Link to post Share on other sites
TR4Tony VC Posted September 6, 2022 Author Report Share Posted September 6, 2022 Iain Essentially better leverage on the drum cylinder when you pull the handbrake. Regards Tony Link to post Share on other sites
TR4Tony VC Posted September 6, 2022 Author Report Share Posted September 6, 2022 Rich, nothing from you by email.pm me ? Link to post Share on other sites
TR4Tony VC Posted November 7, 2022 Author Report Share Posted November 7, 2022 And the batch of extended levers are here ! PM me if I’ve forgotten you please (and sorry) or if you missed the first call there are some sets left that need homes. £50 a set plus £2p&p to TRR people via here. Regards Tony Link to post Share on other sites
Alanretired Posted November 10, 2022 Report Share Posted November 10, 2022 Hi Tony PM sent Alan Gibson Link to post Share on other sites
stu50uk Posted November 11, 2022 Report Share Posted November 11, 2022 Hi Tony PM sent Stuart Brown Link to post Share on other sites
MikeWhite Posted November 13, 2022 Report Share Posted November 13, 2022 (edited) Received my hand brake levers on Friday, superb engineering and quality - Cannot recommend highly enough. I will be avidly awaiting Tony’s next project. Thank you Tony Mike Edited November 13, 2022 by MikeWhite Link to post Share on other sites
TR4Tony VC Posted November 13, 2022 Author Report Share Posted November 13, 2022 Thanks Mike plenty to go at, just trying to do one at a time - just come across a NOS TR4 tunnel bracket (the black crackle one that goes over the gearbox) so that’s off to be looked at in 3D to se if there is an economic way of making in billet. also have some properly uprated engine and gearbox mounts now - as used in BST82B so when they are ready I’ll put a list on as I have had to have a batch made to make it viable as usual and I can only use a few as they don’t break ! regards tony Link to post Share on other sites
TR4Tony VC Posted November 27, 2022 Author Report Share Posted November 27, 2022 A few sets left if anyone wants them! Link to post Share on other sites
Jeffrey Smith Posted June 26, 2024 Report Share Posted June 26, 2024 Hi Tony,do you have a pair of these handbrake levers please ? Or if not,where can I buy some ? Cheers,Jeff Smith Link to post Share on other sites
cvtrian Posted June 26, 2024 Report Share Posted June 26, 2024 35 minutes ago, Jeffrey Smith said: Hi Tony,do you have a pair of these handbrake levers please ? Or if not,where can I buy some ? Cheers,Jeff Smith Hi Jeff, if Tony has sold out, Phil Barnet will be at the IWE with a jumble stall, and he has them Good luck Ian Link to post Share on other sites
Jeffrey Smith Posted June 26, 2024 Report Share Posted June 26, 2024 Cheers Ian.Thank you. Jeff. Link to post Share on other sites
Recommended Posts