marki Posted June 25, 2022 Report Share Posted June 25, 2022 Hi All. As the title says really, overdrive is fine in second, am I presuming right and thinking it’ll be the inhibitor switch ? cheers Mark Quote Link to post Share on other sites
RobH Posted June 25, 2022 Report Share Posted June 25, 2022 Most likely Mark - with any luck it might only need re-adjustment, otherwise the wiring to it may be making a poor connection or the switch may be faulty. If the wiring is standard the two switches are connected in parallel which means everything else must be working OK. Quote Link to post Share on other sites
marki Posted June 25, 2022 Author Report Share Posted June 25, 2022 Hi Rob works fine in second so the solenoid and relay must be ok. Quote Link to post Share on other sites
Andy Moltu Posted June 25, 2022 Report Share Posted June 25, 2022 Yes this is a wiring issue with the inhibitor switches. If it works o 2nd the mechanical side of things must work. Quote Link to post Share on other sites
marki Posted June 26, 2022 Author Report Share Posted June 26, 2022 Sorted, loose wire. Think it’s the first time I’ve fixed a fault and not spent any money Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.