pinky Posted June 24, 2022 Report Share Posted June 24, 2022 Thought I would let you no the results of fitting power assisted steering, from classic driving development It's a very good mod, which will allow my tors to drive the car It takes about 8 hours to fit, the instructions are a bit if'e But OK, when you get to grips with it Quote Link to post Share on other sites
Lebro Posted June 24, 2022 Report Share Posted June 24, 2022 What car was that on ? Bob Quote Link to post Share on other sites
pinky Posted June 24, 2022 Author Report Share Posted June 24, 2022 Hi Bob tr6, I bet you was hopeing it was on a 3 Quote Link to post Share on other sites
Lebro Posted June 24, 2022 Report Share Posted June 24, 2022 well possibly ! Bob Quote Link to post Share on other sites
pinky Posted June 24, 2022 Author Report Share Posted June 24, 2022 I belive they do an electrical one Pink Quote Link to post Share on other sites
Lebro Posted June 24, 2022 Report Share Posted June 24, 2022 Thanks, just wondered, if I do anything I will probably convert to R & P but not yet. Bob Quote Link to post Share on other sites
james christie Posted June 24, 2022 Report Share Posted June 24, 2022 On a TR3A, 28 psi at the front and r&p , no power steering required! james Quote Link to post Share on other sites
peejay4A Posted June 24, 2022 Report Share Posted June 24, 2022 (edited) I fitted Alasdair’s (CDD) power steering conversion a few months ago to Eric (4A). I modified the fluid reservoir mounting to suit my car. A minor bit of inner wing manipulation was required to accommodate the hydraulic ram pin. I’m very pleased with the result. The cars is now very nimble. Edited June 25, 2022 by peejay4A Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.