Malbaby Posted May 27, 2022 Report Share Posted May 27, 2022 Does anyone have the part number for the calipers to suit the factory solid rotors Quote Link to post Share on other sites
Rockie51 Posted May 28, 2022 Report Share Posted May 28, 2022 Hi Malcolm Mine came from Richard Good at Goodparts. They had the original mounting holes filled and redrilled. It now appears that he has sourced them with the correct holes direct from Willwood. Worth having a look. You also need to remember that TR4/4A ones use different bolts from TR6 ones. Might be worth contacting Richard. I have been very happy with his products. Quote Link to post Share on other sites
Malbaby Posted May 28, 2022 Author Report Share Posted May 28, 2022 Hi neighbour I have now been advised that Wilwood calipers may not be approved by Victorian Certification Engineers...probably depends on if the pistons have the rubber dust boots. And yes, Goodparts make quality products. I purchased a pair of rear hubs to suit cv jointed drive shafts, not fitted as yet....Impressive fabrication. Quote Link to post Share on other sites
Rockie51 Posted May 30, 2022 Report Share Posted May 30, 2022 PM sent. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.