Piejun Posted May 22, 2022 Report Share Posted May 22, 2022 Dear all I have trouble connecting the vacuum pipe to the nylon bit connected to the carb. Could someone direct me in the right direction. I have the slip on type vacuum pipe and stroberg zenith 175 CD carbs. Your help is most welcome. Pierre Quote Link to post Share on other sites
gloide69 Posted May 24, 2022 Report Share Posted May 24, 2022 Hi Pierre The internal diameter of my vacuum pipe was too small to fit onto the nylon elbow under my 175CD front carb, so I used a small piece of rubber pipe to over both to connect them together. I hope this helps Paul Quote Link to post Share on other sites
stuart Posted May 24, 2022 Report Share Posted May 24, 2022 What you need is one of these Connector Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.