Paulfc Posted May 9, 2022 Report Share Posted May 9, 2022 Hi, Is it possible to replace the rear oil seal on an overdrive with the o/d remaining in situ and just splitting it from the prop shaft? Thanks. Quote Link to post Share on other sites
Paul J Posted May 9, 2022 Report Share Posted May 9, 2022 No response Paul, easily done once the coupling nut is undone, coupling should slide off the splines then pry out the old seal. Paul Quote Link to post Share on other sites
BRINDUS44 Posted May 10, 2022 Report Share Posted May 10, 2022 Can be done. Ian Quote Link to post Share on other sites
Paulfc Posted May 10, 2022 Author Report Share Posted May 10, 2022 Hi both, Many thanks for your responses. Will probably tackle it at the end of summer. Again, thanks, Paul Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.