Jump to content

It was all going so well!


Recommended Posts

Hi Dan

Before stripping them down, if you operate the throttle linkage slowly by hand you may be able to see slight vertical movement on the throttle spindles if they are worn. Between pairs 1 & 2 are usually the worst. As the adjusting screws begin to engage on the next throttle pair to open the butterflies the resistance from the springs tend to cause the spindles to move slightly if there is wear. Its the shafts that were worn on mine not the actual bodies. 

Alan

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.