jerrytr5 Posted May 2, 2022 Report Share Posted May 2, 2022 6 pot crankshaft front oil seal sleeve should just slide off the crankshaft along with the oil thrower and pulley, right? Seems to have welded itself on. I can't get a puller behind it. I've got a bit of movement after some heat. Any top tips for removal? Thinking of taking the timing chain off and getting a puller behind the lower pulley to get them all off together, but that might put a bit too much force on the teeth to be comfortable. Jerry Quote Link to post Share on other sites
BlueTR3A-5EKT Posted May 2, 2022 Report Share Posted May 2, 2022 Would one of these help ? Go behind all the teeth of the sprocket. Quote Link to post Share on other sites
jerrytr5 Posted May 2, 2022 Author Report Share Posted May 2, 2022 Nice idea Pete, I'll add one to my shopping list. Perserverance with heat got me a couple of mm and then I could get a puller behind the oil thrower and got it moving. Just trashed the thrower in the process so not too bad. Thanks. Jerry Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.