RogerH Posted April 27 Report Share Posted April 27 Hi folks, what is the latest wisdom on these silicone blades. Who supplies etc. to fit a TR4A arm Roger Quote Link to post Share on other sites
Lebro Posted April 27 Report Share Posted April 27 I have fitted some to my '3 & to the drivers side of my Jeep. ( one blade was cut into 2 for the TR) I like them. Bob Quote Link to post Share on other sites
peejay4A Posted May 1 Report Share Posted May 1 Likewise on Eric. They work well. Quote Link to post Share on other sites
Chris Hubball Posted May 1 Report Share Posted May 1 Hi Roger Have them fitted to my TR4 big improvement , sourced them on line from Car Parts International but I believe Revington list them. Cheers Chris. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted May 2 Report Share Posted May 2 These are 12” will they do for a modern TR? https://www.ebay.co.uk/itm/332464094229?epid=1615569330&hash=item4d68677c15:g:qDMAAOSwVJVhp~LJ Quote Link to post Share on other sites
ANFRUSSELL Posted May 2 Report Share Posted May 2 (edited) I got one of these 22 inch blades then cut it and used it to replace the worn rubbers on my 4A and it is vast improvement. https://www.tdcautomotive.com/piaa-silicone-wiper-blade-insert-refill-22-high-performance-skr55e-254791967-does-not-apply-4050278046336 Edited May 2 by ANFRUSSELL Quote Link to post Share on other sites
Tim D. Posted May 3 Report Share Posted May 3 Have also used the silicone inserts.. work well but make sure the profile of the section that fits in the arm itself is correct. there seem to be at least 2 types. runing NoS blades in the TR. Work very well Tim Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.