Jump to content

Recommended Posts

A question for the Motorsport folks, I have nearly completed a partial (non-body off) resto of my TR6 ['72, CP].

Looking at the wee towing eyes on the front they are v thin - so what do you recommend?

I was planning to bolt a proper TRS web strap to the chassis area, or to weld an exhaust clamp around one of the existing eyes underneath the radiator.

This would then need a wee cut into the spoiler to allow the strap to feed through for events.

Any suggestions for the rear??

I'll make 4 or 5 of the Register events, plus some HRCR rounds too - currently entered Carnival, Aintree and looking at Shelsley/Curborough/Harewood later in season.

Cheers All

 

Edited by Conradski
typo
Link to post
Share on other sites
10 hours ago, MichaelH said:

Easy rear towing eye is to weld a large u-bolt to the rear chassis ends

don't forget to paint it yellow or red

Michael H

Cheers - will do.  Maybe see you at a Speed event thru the season.:D

Link to post
Share on other sites

I use the TRS straps front and rear.

Front fitted to the chassis bumper bracket where it comes through the front panel [ no bumper ]

Rear onto the chassis and passing through the bumper fixing holes in rear valance

Roy

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.