Conradski Posted April 4, 2022 Report Share Posted April 4, 2022 (edited) A question for the Motorsport folks, I have nearly completed a partial (non-body off) resto of my TR6 ['72, CP]. Looking at the wee towing eyes on the front they are v thin - so what do you recommend? I was planning to bolt a proper TRS web strap to the chassis area, or to weld an exhaust clamp around one of the existing eyes underneath the radiator. This would then need a wee cut into the spoiler to allow the strap to feed through for events. Any suggestions for the rear?? I'll make 4 or 5 of the Register events, plus some HRCR rounds too - currently entered Carnival, Aintree and looking at Shelsley/Curborough/Harewood later in season. Cheers All Edited April 4, 2022 by Conradski typo Quote Link to post Share on other sites
MichaelH Posted April 4, 2022 Report Share Posted April 4, 2022 Easy rear towing eye is to weld a large u-bolt to the rear chassis ends don't forget to paint it yellow or red Michael H Quote Link to post Share on other sites
Conradski Posted April 5, 2022 Author Report Share Posted April 5, 2022 10 hours ago, MichaelH said: Easy rear towing eye is to weld a large u-bolt to the rear chassis ends don't forget to paint it yellow or red Michael H Cheers - will do. Maybe see you at a Speed event thru the season. Quote Link to post Share on other sites
roy53 Posted April 5, 2022 Report Share Posted April 5, 2022 I use the TRS straps front and rear. Front fitted to the chassis bumper bracket where it comes through the front panel [ no bumper ] Rear onto the chassis and passing through the bumper fixing holes in rear valance Roy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.