markaluge Posted January 9, 2022 Report Share Posted January 9, 2022 Hi, I recall reading once that there is a supplier of an adapter/interface between the temperature transmitter and the thermostat housing which overcomes the dissimilar metal corrosion issue. Can anyone please point me in the right direction? Regards, Mark Quote Link to post Share on other sites
james christie Posted January 9, 2022 Report Share Posted January 9, 2022 Revington https://www.revingtontr.com/product/rtr8155/name/adaptor-male-female-brass james Quote Link to post Share on other sites
markaluge Posted January 9, 2022 Author Report Share Posted January 9, 2022 1 hour ago, james christie said: Revington https://www.revingtontr.com/product/rtr8155/name/adaptor-male-female-brass james Many thanks James Mark Quote Link to post Share on other sites
markaluge Posted January 13, 2022 Author Report Share Posted January 13, 2022 I contacted Revington TR and they are out of stock and seeking a new supplier. If there is anyone out there with a lathe and wants to make one, please do let me know. Regards, Mark Quote Link to post Share on other sites
RogerH Posted January 13, 2022 Report Share Posted January 13, 2022 Hi Mark, have a look here https://www.holden.co.uk/p/adaptor_5_8_in_unf_for_water_temperature_sender_070_017 Roger Quote Link to post Share on other sites
markaluge Posted January 13, 2022 Author Report Share Posted January 13, 2022 2 hours ago, RogerH said: Hi Mark, have a look here https://www.holden.co.uk/p/adaptor_5_8_in_unf_for_water_temperature_sender_070_017 Roger Many thanks Roger, I will pop over to Holden’s to see if they have stock. Jeremy Holden is a friend and neighbour; just a pity he recently sold the business. Mark Quote Link to post Share on other sites
BlueTR3A-5EKT Posted January 13, 2022 Report Share Posted January 13, 2022 5 hours ago, markaluge said: Many thanks Roger, I will pop over to Holden’s to see if they have stock. Jeremy Holden is a friend and neighbour; just a pity he recently sold the business. Mark Could some one measure the TPI of a TR water temp adaptor please. I think it is 3/8” x 19 tpi. BSP. This is almost the one you want https://www.holden.co.uk/p/adaptor_3_8_in_bsp_for_water_temperature_sender_070_017 but the female thread for the gauge temp bulb is wrong as the suggested adaptor is female threaded 5/8 unf. X 18 tpi. The difference is one thread per inch so it will bind as you screw it in. I think!!!!!!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.