markaluge Posted December 6, 2021 Report Share Posted December 6, 2021 Hi all, I am about to start refitting everything behind the dashboard as well as the dashboard itself with all that involves. Can anyone please advise as to the best order to do this in? The battery tray is still not fitted nor the blanking plate, master cylinders or pedals etc. Best regards, Mark Quote Link to post Share on other sites
Ralph Whitaker Posted December 7, 2021 Report Share Posted December 7, 2021 If it were me I would get the battery box fitted first before anything else then you have access to clean and paint the inside after welding. Ralph Quote Link to post Share on other sites
markaluge Posted December 7, 2021 Author Report Share Posted December 7, 2021 Thanks Ralph, I wasn’t going to weld the battery tray in. It was previously held in by a number of screws and I have had it powder coated. Mark Quote Link to post Share on other sites
stuart Posted December 7, 2021 Report Share Posted December 7, 2021 5 minutes ago, markaluge said: Thanks Ralph, I wasn’t going to weld the battery tray in. It was previously held in by a number of screws and I have had it powder coated. Mark Im afraid it should be welded in as it contributes a considerable amount to the integrity of the scuttle and you will get a lot of scuttle shake without. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.