Paulwest Posted November 22, 2021 Report Share Posted November 22, 2021 Hi all, what size bolts connect the H fascia unit to the floor captive nuts. I’ve gone through many sizes and threads and can’t find any that fit. Cheers paul Quote Link to post Share on other sites
RogerH Posted November 22, 2021 Report Share Posted November 22, 2021 (edited) They should be 1/4 UNF - but who knows what a PO may have done. https://www.moss-europe.co.uk/shop-by-model/triumph/tr2-4a/interior/dashboards-consoles/dashboard-tr4-4a-1961-67.html Roger Edited November 22, 2021 by RogerH Quote Link to post Share on other sites
Paulwest Posted November 22, 2021 Author Report Share Posted November 22, 2021 Thanks Roger. I’ll order a pack from Moss. Rgds Paul Quote Link to post Share on other sites
bob-menhennett Posted November 22, 2021 Report Share Posted November 22, 2021 Roger is spot on GHF101 = 1/4" UNF x 1" screw ( Bolts are only part threaded down it's length ) Bob Quote Link to post Share on other sites
harrytr5 Posted November 23, 2021 Report Share Posted November 23, 2021 (edited) 1 1/4" or 1 1/2" x 1/4" UNF as it is easier to locate and pull down. Regards Harry Edited November 23, 2021 by harrytr5 Quote Link to post Share on other sites
cp25616 Posted November 24, 2021 Report Share Posted November 24, 2021 Have to agree with Harry here, need to be longer than 1". Alan G Quote Link to post Share on other sites
Rob Salisbury Posted November 24, 2021 Report Share Posted November 24, 2021 But, and there is possibly a big but here, since Paul has already been through several unspecified bolts and sizes, who knows just what size has been left in the chassis, only way to tell is to run some taps through there and determine just what the current thread is and maybe cut some new threads of a suitable size. Cheers Rob Quote Link to post Share on other sites
John Morrison Posted November 24, 2021 Report Share Posted November 24, 2021 Paul, you have a PM. John. Quote Link to post Share on other sites
JohnRoberts Posted December 20, 2021 Report Share Posted December 20, 2021 Paul. Out of interest if you have a stripped 1/4 unf captive nut you can quite easily re tap M7. M7 taps and Setscrews are readly available at Fastener Stockists. Regards JohnR Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.