stuart Posted February 23, 2022 Report Share Posted February 23, 2022 12 hours ago, John L said: Thanks Martin, mine just doesn't seem to want to sit nicely like yours, it may be the screen rubber is not quite right, that has never been out, perhaps that has to be done? Should the header rail be a loose fit to the side rails, mine doesn't have the original rivets, now bolts, and no washers between the header rail and the side, as in the Moss parts book. John John the header rail should be rock tight to the side members, it also looks from your picture as if your header is bowed up in the middle and sitting too far up at the front that would definitely give you wind noise. Stuart. Quote Link to post Share on other sites
Martin50 Posted February 23, 2022 Report Share Posted February 23, 2022 John, the header on the windscreen is tight and riveted. No movement or flex that I can see in it. Pic below but not sure this helps you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.