Jump to content

Heritage TR6 body shell


Recommended Posts

Hello Harry

I've got a new unused "second batch" shell that I bought from Moss? in 1994? in storage that I'll have a look at over the weekend and see if I can find any numbering. I recall there being a handwritten in marker pen number on the inside of the LH rear wheelarch.

Regards

Bill 

 

Link to post
Share on other sites

Hello Harry

I'm afraid I couldn't find one as a stamped plate, the only ID I could see is the previously mentioned marker pen in the inside LH wheel arch of 001112 with a squiggly line underneath! 

If you do get a more helpful reply, please post.

Meanwhile, the shell is for sale!

Regards

Bill  

Link to post
Share on other sites
15 hours ago, Bill944T said:

Hello Harry

I'm afraid I couldn't find one as a stamped plate, the only ID I could see is the previously mentioned marker pen in the inside LH wheel arch of 001112 with a squiggly line underneath! 

If you do get a more helpful reply, please post.

Meanwhile, the shell is for sale!

Regards

Bill  

Is that a complete shell with all outer panels Bill?

Stuart.

Link to post
Share on other sites

Yes Stuart, all panels, doors on hinges as are bonnet and boot. The only item I'm aware not supplied was the vent lid despite it being a CP RHD specification shell. I do have a new lid for it bought at the time though but just in black primer. 

I've had a few follow up enquiries but unsure of what its worth after costing the individual panels where available from Moss last year at over £13000!

Regards

Bill 

Edited by Bill944T
Link to post
Share on other sites

On the TR6 that I have seen with a Heritage shell the number has been stamped onto a plate and fixed where the trim body normally resides on the bulkhead. The numbers I have seen are BMHTR001130, BMHTR001912 and BMHTR1922. We have 32 x TR6 recorded with these shells in our records and there are presumably many more going by the range of numbers. 

Derek

Link to post
Share on other sites
1 hour ago, saffrontr said:

 fixed where the trim body normally resides on the bulkhead.

Derek

"Trim body?"

Stuart.

Link to post
Share on other sites

My mistake Stuart of course it is where the "body number" plate resides on the bulkhead the "trim body" plate isn't applicable for a Heritage Shell.  Somewhere I have an image of one on a Heritage Shell and if I can find it I will post it here.

Derek 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.