Hawk Posted September 1, 2021 Author Report Share Posted September 1, 2021 13 hours ago, GeoffreyS said: I experienced the same. Gosh it is embarrassing. I have a MotoLita steering wheel. If stated to develop a little bit of forward/backward play. Only about 1/16th”. Enough to upset the earth. To stop the horn sounding, until I could have it remedied, I had to pull the steering wheel toward me while driving. (Removing the horn fuse gave for an easier, although not legal, drive). I still haven't managed to sort mine .... and have just disconnected the relay Quote Link to post Share on other sites
saffrontr Posted September 1, 2021 Report Share Posted September 1, 2021 I had something similar a few weeks back and it was the horn brush fitted the wrong way up Derek Quote Link to post Share on other sites
GeoffreyS Posted September 1, 2021 Report Share Posted September 1, 2021 6 hours ago, Hawk said: I still haven't managed to sort mine .... and have just disconnected the relay 6 hours ago, Hawk said: I still haven't managed to sort mine .... and have just disconnected the relay A good interim action! Quote Link to post Share on other sites
Macleesh Posted September 1, 2021 Report Share Posted September 1, 2021 In the middle of fixing mine just now. You can gain some space between the wheel boss and slip ring by slackening off the clamp on the steering column and easing the wheel back by a few mm, however the main culprit seems to be a bit of play in the top column bush which I'm replacing in readiness for its MOT, if the horn still goes off after that the boss is going in my Lathe and I'll turn down the protruding bit. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.