Jump to content

Recommended Posts

Does anyone know off hand the correct dia for line to pump and pump to carbs. i.e what size for the AC pump inlet and outlet.

I think 1/4 to carbs and 5/16th tank to pump

Thanks.

Rod

Link to post
Share on other sites

Which car?

Yes always 5/16” tank to pump via  the petrol tap.

For pump to carbs.   Depending on inlet pipe types fitted to the float lids of the carbs.   It can be either be 1/4” for all push-on connectors or 5/16” if you have banjo fittings. 
 

Cheers

Peter W

Link to post
Share on other sites
1 hour ago, mikej said:

You may want to specify ethanol resistant SAE R9 hoses while you are about it, I think RTR sell it as probably do other suppliers.

Better off going for R14 spec now.

Stuart.

Link to post
Share on other sites
  • 1 month later...

Yes indeed if it's available but R9 is not withdrawnand still suitable.  I'd realy like to know why some ancient fuel hoses with no specification marks at all are behaving realy well whilst others of the same vintage (ie., the ones on my wife's Mini), have gone all soggy.

MJ

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.