Jump to content

Tr4 engine torque bar


Recommended Posts

If anyone has  a TR4 engine torque bar sitting around would you be able to  provide me with a diagram of it and dimensions so we can fabricate one 

alternatively happy to buy one second hand but its usually the freight to NZ that kills it.   Stay safe over there

cheers Jim 

Link to post
Share on other sites

Does this help?

Stuart.

 

1848F5DC-45D3-4E0B-9750-2FFDE7860D99.jpeg

68555A48-AB4C-4865-A2BD-8913156F14FA.jpeg

B3C34904-257E-4533-AF95-5CEB01C41645.jpeg

36BF1BA0-8174-4990-BE3B-855C68BD48A4.jpeg

EEF44042-F6A4-4769-A41C-A6A236AE0A71.jpeg

E03FBC15-A33B-475D-AFA3-9B11C2D32EB9.jpeg

CA41E5B3-D4C1-431A-94A2-B7F96C7B881C.jpeg

F1AB8B36-EC12-41AD-BD7A-0AECF6E85705.jpeg

Link to post
Share on other sites

Brilliant   Thanks Stuart,  I will fabricate one up now  appreciate the help.  Hope your all good down in Turo.

 

Thanks agin 

Jim 

Link to post
Share on other sites

Cheers Marco 

Link to post
Share on other sites
11 hours ago, Z320 said:

Hi Stuart,

the steel is 1/10" = 2.5 mm?

Ciao, Marco

Correct Marco

Stuart.

Link to post
Share on other sites
12 hours ago, kiwi-jim said:

Brilliant   Thanks Stuart,  I will fabricate one up now  appreciate the help.  Hope your all good down in Turo.

 

Thanks agin 

Jim 

We are thanks Jim.

The rubber bump stop is the same as used at the rear of a 4a bonnet.

Stuart.

Edited by stuart
Link to post
Share on other sites

I fitted one of these but didn't consider it sufficient because of its position in relation to the centre line of the crankshaft.

I devised my own system, and it is described in TR Action 130 (May 1996), repeated in Technicalities CD pages G15-G19.  Dirt cheap!  Unfortunately, wouldn't work on a TR2/3 as the suspension mountings are closer together.

Ian Cornish

Link to post
Share on other sites
1 hour ago, ianc said:

I fitted one of these but didn't consider it sufficient because of its position in relation to the centre line of the crankshaft.

I devised my own system, and it is described in TR Action 130 (May 1996), repeated in Technicalities CD pages G15-G19.  Dirt cheap!  Unfortunately, wouldn't work on a TR2/3 as the suspension mountings are closer together.

Ian Cornish

The reason I have that one on my shelf is because using the up-rated Landrover round engine mounts means the bump rubber doesnt reach as I was going to fit it to mine after engine upsizing.

Stuart.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.