Jump to content

Recommended Posts

Hi,

Mentioned here a couple of weeks ago that my distributor seized up. Was finally able to get the shaft out of the bronze bushing, whilst doing so a number of little bonze pieces fell out. It appears that the top 1/2" of the bushing totally came to pieces. Don't know why this happened but lack of lubrication ( my bad) might be the reason.

Yves  

Link to post
Share on other sites

I think the bronze bush you refer to is a sintered bushing, so will break up as you described.  

https://www.oilitebushes.com/sintered-bronze-bushes.html
 

Have you got a replacement fitted and working?

Peter W

Edited by BlueTR3A-5EKT
Link to post
Share on other sites
7 hours ago, BlueTR3A-5EKT said:

I think the bronze bush you refer to is a sintered bushing, so will break up as you described.  

https://www.oilitebushes.com/sintered-bronze-bushes.html
 

Have you got a replacement fitted and working?

Peter W

Hi Peter,

Yes, replacement fitted and working. 

Thanks,

Yves

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.