Malbaby Posted July 1, 2021 Report Share Posted July 1, 2021 As above Quote Link to post Share on other sites
Waldi Posted July 1, 2021 Report Share Posted July 1, 2021 3-500 pounds. Quote Link to post Share on other sites
cp25616 Posted July 1, 2021 Report Share Posted July 1, 2021 Looks to be from a 2.5pi saloon so the dizzy is technically incorrect so would need money spent on it, looks to be a tired set up too needing lots of love, attention and money spent on it so my reckoning would be £250 to £300 tops. Alan G Quote Link to post Share on other sites
Richard71 Posted July 1, 2021 Report Share Posted July 1, 2021 Maybe worth more breaking the package and selling as individual items? Richard. Quote Link to post Share on other sites
astontr6 Posted July 1, 2021 Report Share Posted July 1, 2021 1 hour ago, cp25616 said: Looks to be from a 2.5pi saloon so the dizzy is technically incorrect so would need money spent on it, looks to be a tired set up too needing lots of love, attention and money spent on it so my reckoning would be £250 to £300 tops. Alan G The dizzy does not look to have the mechanical drive take off for the Rev counter? As your rev counter would have to be converted to electronic and completely rebuilt another expense! Therefore I would only pay £250 max. Most of the other parts would have to be traded in for new re-con ones and other bits would need re-plating zinc and passivated! The Lucas pump is a bin job as far as I am concerned. Use a Bosch or Sytec pump! Bruce. Quote Link to post Share on other sites
stuart Posted July 1, 2021 Report Share Posted July 1, 2021 As your in Australia Im sure the saloon guys down there would be very happy to buy the whole lot off you. Stuart. Quote Link to post Share on other sites
JohnC Posted July 1, 2021 Report Share Posted July 1, 2021 Give David Clarke or Peter Bower a call. JC Quote Link to post Share on other sites
Mike C Posted July 1, 2021 Report Share Posted July 1, 2021 Here's a rebuilt system on Australian ebay for about the price of a good rebuild : https://www.ebay.com.au/itm/174820777532?hash=item28b4215e3c%3Ag%3AgQMAAOSwAfxgwCjm&LH_ItemCondition=3000 Quote Link to post Share on other sites
Bill944T Posted July 1, 2021 Report Share Posted July 1, 2021 Are the injectors the type that can be reconditioned? Regards Bill Quote Link to post Share on other sites
JohnC Posted July 2, 2021 Report Share Posted July 2, 2021 20 hours ago, Mike C said: Here's a rebuilt system on Australian ebay for about the price of a good rebuild : Seems to be missing the bracket that holds the the cold start enrichment cable. Quote Link to post Share on other sites
Mike C Posted July 2, 2021 Report Share Posted July 2, 2021 43 minutes ago, JohnC said: Seems to be missing the bracket that holds the the cold start enrichment cable. The cold start lever is there and fitted with a new cable clamp-is the stop plate the lever runs in essential? From my point of view this assembly would be be worth a look because it's been rebuilt with Viton seals, bench tested and recalibrated by Peter Bower, but I have a perfectly good PI system and I don't see any point in collecting a spare set. Getting back to Malbaby's original question, I'd have to say $A300-500 tops, there's at least $A1200 of work needed to get the injection components serviceable and I'd trash the Lucas pump. Quote Link to post Share on other sites
CP26309 Posted July 3, 2021 Report Share Posted July 3, 2021 Mike that Lucas pump would have been laying flat in a Saloon application, unlike upright in a TR6, so should be fine. Actually my Lucas pump has only been reconditioned once in 49 years in my TR. These Lucas pumps were in use in Formula One on Cosworth DFV engines for two decades! Quote Link to post Share on other sites
cp25616 Posted July 4, 2021 Report Share Posted July 4, 2021 My second current TR6 which I bought last October for something to do, certainly has given me that for sure, I converted it back to a Lucas pump from a Bosch lookalike and everything is AOK just now anyway. Alan G Quote Link to post Share on other sites
JohnC Posted July 6, 2021 Report Share Posted July 6, 2021 On 7/4/2021 at 6:15 PM, cp25616 said: I converted it back to a Lucas pump Where did you source the pump (or the reconditioning)? Thanks, John Quote Link to post Share on other sites
Gordon Bayley Posted July 13, 2021 Report Share Posted July 13, 2021 I have 2 metering units to sell, how much should i ask?, taking them to Malvern cheers Gordon. Quote Link to post Share on other sites
stuart Posted July 13, 2021 Report Share Posted July 13, 2021 1 hour ago, Gordon Bayley said: I have 2 metering units to sell, how much should i ask?, taking them to Malvern cheers Gordon. Make sure they still turn as if theyre seized theyre not worth much at all Stuart. Quote Link to post Share on other sites
Gordon Bayley Posted July 15, 2021 Report Share Posted July 15, 2021 Yes Stuart it is free to turn, its still got red plastic caps over the unions, I cant remember its history or when i got it , taking it to Malvern this year and selling other TR stuff I'v booked a pitch. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.