cfgarrod Posted June 29, 2021 Report Share Posted June 29, 2021 Question for the panel... 1970 CP: Just noticed that the brass air valve mounting is loose in the manifold. I removed it by simply pulling it out, there seems to be a rubber bush inside? Before I reach for my hammer and/or loctite how is this brass screw mounting fitted to the inlet manifold body? Nothing shown in the parts catalogue...? Thanks, Chris G Quote Link to post Share on other sites
HSM Posted June 29, 2021 Report Share Posted June 29, 2021 Hi Chris An interference press fit Regards Harvey Quote Link to post Share on other sites
Mk2 Chopper Posted June 29, 2021 Report Share Posted June 29, 2021 Mine was loose, just used araldite or chemical metal, it was a two part chemical anyway, it's fixed nice and solid now. Gareth Quote Link to post Share on other sites
Andy Moltu Posted July 1, 2021 Report Share Posted July 1, 2021 I used a smear of araldite and a gentle tap with a hammer. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.