openroad Posted June 24, 2021 Report Share Posted June 24, 2021 Does anyone know what this robust tool is for please. Thankyou, Conrad. Quote Link to post Share on other sites
Mark69 Posted June 24, 2021 Report Share Posted June 24, 2021 A guess , but pull liners out a block. Quote Link to post Share on other sites
stuart Posted June 24, 2021 Report Share Posted June 24, 2021 Home made as well I would say. Stuart. Quote Link to post Share on other sites
openroad Posted June 24, 2021 Author Report Share Posted June 24, 2021 Sadly my thoughts, but hoped it might be something good ! Conrad. Quote Link to post Share on other sites
Z320 Posted June 24, 2021 Report Share Posted June 24, 2021 What's not good with it? Quote Link to post Share on other sites
openroad Posted June 24, 2021 Author Report Share Posted June 24, 2021 Still dont what it is , thought it might be a original tool. Quote Link to post Share on other sites
ntc Posted June 24, 2021 Report Share Posted June 24, 2021 (edited) Any numbers on it? No but a useful tool Edited June 24, 2021 by ntc Quote Link to post Share on other sites
Z320 Posted June 24, 2021 Report Share Posted June 24, 2021 It's an unique tool! Quote Link to post Share on other sites
Richard71 Posted June 25, 2021 Report Share Posted June 25, 2021 12 hours ago, Mark69 said: A guess , but pull liners out a block. Definitely a liner puller, measure the diameter of the dolly (the part welded to the universal joint), that'll tell you which liners it's suitable for. Richard. Quote Link to post Share on other sites
Harbottle Posted June 25, 2021 Report Share Posted June 25, 2021 If you could figure out why the bottom has a flat side ? This might be a guide. Definitely for pulling / compressing and has home made look. Quote Link to post Share on other sites
Ian Vincent Posted June 25, 2021 Report Share Posted June 25, 2021 The flat side is so that it can be threaded into place from the top. Rgds Ian Quote Link to post Share on other sites
openroad Posted June 25, 2021 Author Report Share Posted June 25, 2021 Thankyou for your input gentlemen, no numbers that i can see Neil. I will measure it , and see the diameter. Cheers, Conrad. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.