Jump to content

3 sisters sprint - the video


Recommended Posts

Well folks this is the video 

do I spin or save ?

here are a few runs on a really hot day. 

 

Link to post
Share on other sites

Ha ha it’s not the quietest. But gets through scrutineering - just.

Link to post
Share on other sites

Sounds free and crisp. Well done Hamish

 

Link to post
Share on other sites
1 hour ago, Drewmotty said:

Good work.

Seems to spin up well Hamish. Are you using a super light flywheel? What cam are you using?

Andrew 

the flywheels a standard one but lightened to 19.6lbs modified for a diaphragm clutch

i am afraid i don't known what the cam is its a mid 1970' revington special that the PO fitted.

but with the exhaust i have the power is really too high up the rev range.

it is set upon a rolling road each year best 100 quid i spend  

H

 

 

Thanks Mal  

the engine really felt it by the end of the day - temps were good but it had been tested !!!!!!

a rest seems to have settled it again

 

H

 

Link to post
Share on other sites
9 minutes ago, kevin bryant said:

Nice one Hamish.

It's a great circuit for a TR3 isn't it.  

Kev  

Thanks Kev 

yes a great technical track. A choice of layouts too. A while since we have used the 2 lapper. 
 

Not too dissimilar to Curborough but longer and you get lots of runs as they don’t have to do batches. 
 

I emailed so pics and info for you. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.