Hamish Posted June 16, 2021 Report Share Posted June 16, 2021 Well folks this is the video do I spin or save ? here are a few runs on a really hot day. Quote Link to post Share on other sites
BRENDA1 Posted June 17, 2021 Report Share Posted June 17, 2021 Well done good to watch, would be better to come and spectate some time when we are allowed, this will make you laugh Carole say I think H needs a new exhaust. Mike redrose group Quote Link to post Share on other sites
Hamish Posted June 17, 2021 Author Report Share Posted June 17, 2021 Ha ha it’s not the quietest. But gets through scrutineering - just. Quote Link to post Share on other sites
Drewmotty Posted June 18, 2021 Report Share Posted June 18, 2021 Good work. Seems to spin up well Hamish. Are you using a super light flywheel? What cam are you using? Quote Link to post Share on other sites
4Mal Posted June 18, 2021 Report Share Posted June 18, 2021 Sounds free and crisp. Well done Hamish Quote Link to post Share on other sites
Hamish Posted June 18, 2021 Author Report Share Posted June 18, 2021 1 hour ago, Drewmotty said: Good work. Seems to spin up well Hamish. Are you using a super light flywheel? What cam are you using? Andrew the flywheels a standard one but lightened to 19.6lbs modified for a diaphragm clutch i am afraid i don't known what the cam is its a mid 1970' revington special that the PO fitted. but with the exhaust i have the power is really too high up the rev range. it is set upon a rolling road each year best 100 quid i spend H Thanks Mal the engine really felt it by the end of the day - temps were good but it had been tested !!!!!! a rest seems to have settled it again H Quote Link to post Share on other sites
kevin bryant Posted June 21, 2021 Report Share Posted June 21, 2021 Nice one Hamish. It's a great circuit for a TR3 isn't it. Kev Quote Link to post Share on other sites
Hamish Posted June 21, 2021 Author Report Share Posted June 21, 2021 9 minutes ago, kevin bryant said: Nice one Hamish. It's a great circuit for a TR3 isn't it. Kev Thanks Kev yes a great technical track. A choice of layouts too. A while since we have used the 2 lapper. Not too dissimilar to Curborough but longer and you get lots of runs as they don’t have to do batches. I emailed so pics and info for you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.