Jump to content

Wood dashboard alteration


Recommended Posts

I'm considering installing a clock i my TR5 walnut dash in place of the instrument illumination rheostat in the centre.

Does anyone have a contact for someone who could reliably cut and recess the required larger hole for a 2" clock, without damaging the veneer, in the North Notts/South Yorks/Lincs area?

Dave McD

Link to post
Share on other sites

I'm not particularly familiar with TR5 dash, so others may advise differently, but you may find that the metal behind the wooden dash also needs to be modified to accept the clock. The rheostat has a fairly narrow fixing, typically secured to the metalwork using a thin nut. i.e. Nowhere near the diameter of the clock.

Good luck

TT

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.