DRD Posted April 7, 2021 Report Share Posted April 7, 2021 Hi All, can anyone recommend a reasonable u-joint press tool that works/fits OK on the TR drive shaft universal joints? Cheers Darren Quote Link to post Share on other sites
RogerH Posted April 7, 2021 Report Share Posted April 7, 2021 Hi Darren, something like this Press Or a decent bench vice. Make sure, whatever you use, that the shaft is square to the press when squishing. Roger Quote Link to post Share on other sites
Z320 Posted April 7, 2021 Report Share Posted April 7, 2021 a 3 to. arbor press is a very good advice, you will see how useful it is for a lot of things, I bought mine used for 80 € on eBay Quote Link to post Share on other sites
DRD Posted April 7, 2021 Author Report Share Posted April 7, 2021 2 hours ago, RogerH said: Hi Darren, something like this Press Or a decent bench vice. Make sure, whatever you use, that the shaft is square to the press when squishing. Roger1 Thanks Roger that seems a good price for what appears to be a substantial piece of kit! Quote Link to post Share on other sites
Ian Vincent Posted April 7, 2021 Report Share Posted April 7, 2021 +1 for the bench vice. That's all I have ever used. Rgds Ian Quote Link to post Share on other sites
Lebro Posted April 7, 2021 Report Share Posted April 7, 2021 +2 Quote Link to post Share on other sites
harlequin Posted April 7, 2021 Report Share Posted April 7, 2021 I bought one like this, mine is a Chinese copy of the one produced by Tiger tools, it's s a really solid bit of kit but unfortunately the jaws are just to wide for the uj's on a TR George Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.