AarhusTr6 Posted March 21, 2021 Report Share Posted March 21, 2021 (edited) Hi I'm removing the standard airbox and really like the K&N filters but my budget is about half on what the K&Ns costs, ie £100 each. These seem to be the K&Ns most fit over the pond on the carb cars, but wondered if anyone saw some nice cheaper ones? Edited March 21, 2021 by AarhusTr6 Quote Link to post Share on other sites
DRD Posted March 21, 2021 Report Share Posted March 21, 2021 4 hours ago, AarhusTr6 said: Hi I'm removing the standard airbox and really like the K&N filters but my budget is about half on what the K&Ns costs, ie £100 each. These seem to be the K&Ns most fit over the pond on the carb cars, but wondered if anyone saw some nice cheaper ones? These are a bit cheaper. https://www.ebay.co.uk/itm/TRIUMPH-TR4A-TR5-TR6-STAINLESS-STEEL-HS6-SU-CONE-AIR-FILTER-GASKET-SCREWS-/284039671461?_trksid=p2349624.m46890.l49292 Quote Link to post Share on other sites
iani Posted March 22, 2021 Report Share Posted March 22, 2021 On 3/21/2021 at 11:03 AM, DRD said: These are a bit cheaper. https://www.ebay.co.uk/itm/TRIUMPH-TR4A-TR5-TR6-STAINLESS-STEEL-HS6-SU-CONE-AIR-FILTER-GASKET-SCREWS-/284039671461?_trksid=p2349624.m46890.l49292 I just removed similar from my GT6 as they don't allow for the fitment of stub stacks. Quote Link to post Share on other sites
Kenrow Posted March 23, 2021 Report Share Posted March 23, 2021 When I first purchased my Tr 250 it had K&Ns in the original air box? The air box had the front and middle couple of inches cut out to allow better air flow. Not sure if it did any good. Quote Link to post Share on other sites
washi Posted May 20, 2021 Report Share Posted May 20, 2021 Limora and Bastuck have them Quote Link to post Share on other sites
AarhusTr6 Posted May 21, 2021 Author Report Share Posted May 21, 2021 I founds these from my new Belgian supplier, only €20 euro each Quote Link to post Share on other sites
washi Posted May 21, 2021 Report Share Posted May 21, 2021 I have the same I think, originally from Bastuck, right? (If I get the stamp right) Quote Link to post Share on other sites
washi Posted May 21, 2021 Report Share Posted May 21, 2021 Is it for ZS carb? 175CD? Because then they won’t fit Quote Link to post Share on other sites
AarhusTr6 Posted May 21, 2021 Author Report Share Posted May 21, 2021 Hi The pic I dont hitnk is for the 175s but the ones they send me, apparantly will! Richard Quote Link to post Share on other sites
washi Posted May 21, 2021 Report Share Posted May 21, 2021 2 hours ago, AarhusTr6 said: Hi The pic I dont hitnk is for the 175s but the ones they send me, apparantly will! Richard Indeed, this one is missing the hole on top. Ask me how I know... I received the ones in the picture first and then had to sent them back Quote Link to post Share on other sites
AarhusTr6 Posted May 26, 2021 Author Report Share Posted May 26, 2021 On 5/21/2021 at 4:37 PM, washi said: Indeed, this one is missing the hole on top. Ask me how I know... I received the ones in the picture first and then had to sent them back Hi Washi They wrote and said I would need to do some drilling, so if you got from same place, then your advice is what they are using! I have access to some okay machinery so am happy to drill new holes. This saves me 130 euros over K&N Quote Link to post Share on other sites
washi Posted May 26, 2021 Report Share Posted May 26, 2021 53 minutes ago, AarhusTr6 said: Hi Washi They wrote and said I would need to do some drilling, so if you got from same place, then your advice is what they are using! I have access to some okay machinery so am happy to drill new holes. This saves me 130 euros over K&N I’ve sent them back and then they shipped the correct ones. Got them from Bastuck Quote Link to post Share on other sites
washi Posted June 2, 2021 Report Share Posted June 2, 2021 Did you manage to get them installed? Quote Link to post Share on other sites
AarhusTr6 Posted June 3, 2021 Author Report Share Posted June 3, 2021 13 hours ago, washi said: Did you manage to get them installed? I am getting them drilled hopefully this weekend, will show pictures. I am though really impressed with the quality of them, real German made ! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.