AarhusTr6 Posted March 14, 2021 Report Share Posted March 14, 2021 Hi Putting back together floor carpets. The door sill caprpets, you sill see in one picture, the carpet, with vinyl edging. I am fine with the bit going to the back of the car, but am confused on how it works going to the footwell. If you look in one picture, I wrote "what do you do here?". PO just twisted in, but I was thinking a cut in the vinyl is needed? Also in the footwell., the wiring loom goes up. does the carpet just get some spray adhesive and it goes to the end of footwell`? Thanks for help. PS - ., . I put these strips in washing machine, cool was . . wow what a difference! Richrd Quote Link to post Share on other sites
jpmf Posted March 14, 2021 Report Share Posted March 14, 2021 Put a nick in it if you can't heat it and stretch it, run it all the way to the front (over the loom) stuck down with a bit of goo and when you put the side carpets in the footwell they butt against the furflux (or fit under it, depending on the carpet) and sit down on top of the sill and that area is well covered. Quote Link to post Share on other sites
ed_h Posted March 14, 2021 Report Share Posted March 14, 2021 If you zomm in, you might make out how it is in my car. The vinyl ends just at the up-curve ovf rpthe door opening. Ed Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.