Bfg Posted March 5, 2021 Report Share Posted March 5, 2021 Morning all, I've been asking around because I'm looking to buy a used TR4A tonneau cover ..for me to drive solo with the passenger seat covered. One kind gentleman is seeing if he has one for me, and another has suggested that one from a TR6 ought to be very similar but for the stud positions ..particularly those under the windscreen. Has anyone swap the steering wheel pocket of a tonneau from left to RHD successfully, and if done by a professional trimmer can you give me an indication of cost ? Otherwise any general advice on what to be wary of ? Secondly, I was wondering about the type of outdoor car covers which just cover the windscreen, hood and side windows, rather than the complete car. Are they convenient to use in real life and do they keep the car dry inside ? Can the vent flap be left open under the cover to allow air to circulate within.? And are specific press stud or lift-a-dots needed ? Many thanks indeed. Pete. Quote Link to post Share on other sites
Nigel Triumph Posted March 5, 2021 Report Share Posted March 5, 2021 Hi Pete, If you try to swap the steering wheel pocket from one side to the other, isn't there bound to be an unsightly (and possibly leaky) repair needed over the pocket's old location? My inclination would be to wait and watch eBay etc until the correct handed tonneau appears. As for the cover, I use a Classic Additions car cap on my TR6 and BMW Z3: https://www.classicadditions.com/en-GB/outdoor-car-covers/waterproof-outdoor-half-car-cover/prod_10074 Size XS is a good fit. It's really best used for light showers, or as a precaution when parked during days out or overnight when touring. I wouldn't recommend it for prolonged storage or heavy storms. The vent flap can be left open; I normally tuck the front edge of the cover under the wiper blades. Nigel Quote Link to post Share on other sites
Hamish Posted March 5, 2021 Report Share Posted March 5, 2021 Just add another steering wheel pocket. yes it’ll look like a dual control car but may be a cheaper option. Quote Link to post Share on other sites
North London Mike Posted March 5, 2021 Report Share Posted March 5, 2021 (edited) As LNK has a Surrey I can't speak to the tonneau cover. However, I can recommend a turret cover for additional protection whilst on tour, away from the garage. Additional weather storm protection, UV damage and security (if they can't see it, they're unlikely to try to steal it). Home made, the wife made a pattern, wouldn't be without it Edited March 5, 2021 by North London Mike Quote Link to post Share on other sites
Bfg Posted March 5, 2021 Author Report Share Posted March 5, 2021 Thanks guys, for £50 I think that's a no brainer. Must admit I prefer the fit of yours Mike than that in shown in the galley of classicadditions. Cheers. Pete. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted March 5, 2021 Report Share Posted March 5, 2021 (edited) Hi Pete, Tonneau covers. All TR4-6 covers are the same basic shape before the fasteners are fitted. This of course exempts LG to rh drive and late TR 6 with head rest pockets. I obtained years ago a Rhino cockpit/roof cover from the mgmowners club that works very well on a my TR. I also use in winter time to cover the screen and side windows on my euro box if it is going to be frosty. Bit bulky for stashing in the boot of a TR though. Not cheap! https://www.mgocspares.co.uk/acatalog/MGB_CARCOVERS.html Edited March 5, 2021 by BlueTR3A-5EKT Quote Link to post Share on other sites
AndyR100 Posted March 5, 2021 Report Share Posted March 5, 2021 2 hours ago, North London Mike said: As LNK has a Surrey I can't speak to the tonneau cover. However, I can recommend a turret cover for additional protection whilst on tour, away from the garage. Additional weather storm protection, UV damage and security (if they can't see it, they're unlikely to try to steal it). Home made, the wife made a pattern, wouldn't be without it Super idea to use the door handle and fuel-filler to locate the cover, the longer straps going to the wheels or underneath (which i have on mine) are alway a concern for paintwork rubbing. Do you have something similarly creative to hold down by the windscreen? Any pics? ...... Andy Quote Link to post Share on other sites
North London Mike Posted March 5, 2021 Report Share Posted March 5, 2021 (edited) Hi Andy Yes, Velcro straps onto wiper arms, same as those used for the door, Halfords ! So five attachment points, both wipers, both doors and the fuel filler. On (or off) in under a minute with a co-pilot, very secure. Other benefit is that it rolls up to almost nothing and you can use one of the attachments as a compression strap...... Edited March 5, 2021 by North London Mike Quote Link to post Share on other sites
AndyR100 Posted March 5, 2021 Report Share Posted March 5, 2021 1 minute ago, North London Mike said: Hi Andy Yes, Velcro straps onto wiper arms, same as those used for the door, Halfords ! So five attachment points, both wipers, both doors and the fuel filler. On (or off) in under a minute with a co-pilot, very secure Thanks Mike - that is very helpful, I think I may try and do something similar with my cockpit cover ...... Andy Quote Link to post Share on other sites
Bfg Posted March 6, 2021 Author Report Share Posted March 6, 2021 aside from the MG cover fitting ( and thank you Sir for the link to Rhino MG-Midget ), has anyone tried a half cover off an Mx5 ? This looks to be nicely made for £84 from UK custom Covers < here > They have another style for five quid cheaper (below) which is held in place by closing doors and boot lid down on its edges. and then on e-bay there a cheaper version, again for the MX5 at £32 They all seem to have a little slack in their fit, but has anyone tried to see if they'd serve well on a TR4, 4A, 5, or 6 ? Thanks, Pete. Quote Link to post Share on other sites
trevor Posted March 6, 2021 Report Share Posted March 6, 2021 I have a classic additions top cover for my old MX5 is very well made and storm proof and easy to fit as Nigel say just tuck under the wiper blades and the rear flap goes in the boot . Quote Link to post Share on other sites
Peter V W Posted March 6, 2021 Report Share Posted March 6, 2021 My Elise has a “shower cap” very light weight, attached with Velcro as shown. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.