Dave McDonald Posted March 11, 2021 Author Report Share Posted March 11, 2021 Well I finally got round to pumping the Waxoyl into me TR5 chassis 2 days ago, not without some trepidation I must admit. It turned out quite well actually. Used a Shultz gun with a flexible clear plastic hose with a nozzle on the end allowing the Waxoyl to spray forward and sideways in a fan. Used 75psi on the compressor. Got the hose in every possible hole and put gaffer tape over all the other intermediate holes to prevent it spilling out. Not nearly as messy as I expected. Left it a couple of days and took all the tape off today. No drip or spills. Very pleased with the outcome. Would definitely do it again. Dave McD Quote Link to post Share on other sites
ianc Posted March 12, 2021 Report Share Posted March 12, 2021 Well done. Might dribble a little as the ambient temperature rises towards summer. Ian Cornish Quote Link to post Share on other sites
stuart Posted March 12, 2021 Report Share Posted March 12, 2021 1 hour ago, ianc said: Well done. Might dribble a little as the ambient temperature rises towards summer. Ian Cornish Not once the white spirit which is its medium evaporates. Stuart Quote Link to post Share on other sites
Dave McDonald Posted March 14, 2021 Author Report Share Posted March 14, 2021 On 3/12/2021 at 8:44 AM, ianc said: Well done. Might dribble a little as the ambient temperature rises towards summer. Ian Cornish Ian, Yes, I suffer from the same problem, as I get older! Dave McD Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.