MikeS Posted Tuesday at 11:55 AM Report Share Posted Tuesday at 11:55 AM I have changed brakes but pedal is still very hard, does not allow wheels to stop rotating at all, servo pads and master cylinder all new. Quote Link to post Share on other sites
Motorsport Mickey Posted Tuesday at 01:15 PM Report Share Posted Tuesday at 01:15 PM Sounds like a servo problem, can you byepass it with a-made up pipe ? Hopefully you’ll see braking effect then proving the rest of the system. Mick Richards Quote Link to post Share on other sites
Mk2 Chopper Posted Tuesday at 04:21 PM Report Share Posted Tuesday at 04:21 PM Did it bleed ok? Gareth Quote Link to post Share on other sites
Mike C Posted Tuesday at 09:34 PM Report Share Posted Tuesday at 09:34 PM "does not allow wheels to stop rotating at all,"- even with a crook master cylinder this shouldn't happen. I agree with the above- did any fluid emerge when you bled the brakes? Vary rare occurrence- but the symptoms could be caused by a blocked line from the M/C. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.