michaeldavis39 Posted February 18, 2021 Report Share Posted February 18, 2021 (edited) Has anyone got a picture of what the cover looks like on the rear of the switch on a CR series where the wires come out at the side not straight back. See my photo of wiring - is there something that anyone knows of suitable to cover these wires neatly other than insulation tape? Thanks in advance. Edited February 18, 2021 by michaeldavis39 Quote Link to post Share on other sites
BlueTR3A-5EKT Posted February 18, 2021 Report Share Posted February 18, 2021 I recall the plastic cap being red, but am happy to be told otherwise. looked a bit like this one on an early model strg lock. Quote Link to post Share on other sites
michaeldavis39 Posted February 18, 2021 Author Report Share Posted February 18, 2021 Ive seen that before which is the wiring coming straight out the back not to the side Quote Link to post Share on other sites
Topoff Posted February 18, 2021 Report Share Posted February 18, 2021 I think those wires will bend enough to go out the back. Quote Link to post Share on other sites
astontr6 Posted February 19, 2021 Report Share Posted February 19, 2021 16 hours ago, michaeldavis39 said: Has anyone got a picture of what the cover looks like on the rear of the switch on a CR series where the wires come out at the side not straight back. See my photo of wiring - is there something that anyone knows of suitable to cover these wires neatly other than insulation tape? Thanks in advance. My car is a 73 car and has Lucar Terminals coming straight out the back, with at least 5 terminations and a tapered black plastic cover. Yours is nothing like my car? Bruce. Bruce. Quote Link to post Share on other sites
michaeldavis39 Posted February 19, 2021 Author Report Share Posted February 19, 2021 (edited) Mines a 74 car and the wiring is new -( part 93 on moss diagram) to match the new wiring loom- which it does after just checking - so still no further forward- perhaps i will have to make a cover from something else. Edited February 19, 2021 by michaeldavis39 Quote Link to post Share on other sites
super6al Posted February 20, 2021 Report Share Posted February 20, 2021 Hi Mine is a '74 CR. Same as Bruce describes - black tapered cover with wires coming straight out the back. Picture is taken from underneath looking up. Alan Quote Link to post Share on other sites
michaeldavis39 Posted February 20, 2021 Author Report Share Posted February 20, 2021 Thank you. I have ordered a silicon cup shaped cover that is the correct diameter to fit snuggly over the ignition housing and decide when fitting back onto car how the wiring will come out of it. Quote Link to post Share on other sites
michaeldavis39 Posted February 22, 2021 Author Report Share Posted February 22, 2021 Happy day today - found old wiring loom along with the ignition cover boot! Problem solved yey Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.