Phil Read Posted January 11, 2021 Report Share Posted January 11, 2021 I am about to repalce the N/S floor. I intend to support the body under the sill are there any other precautions I should take or pitfalls I need to be aware of? Thanks in advance. Quote Link to post Share on other sites
stuart Posted January 11, 2021 Report Share Posted January 11, 2021 If its a pre 60K then the floor comes out from the inside. Sit the chassis up on stands and level them up then you should be OK ,I wouldnt remove it without it being on the chassis. Stuart. Quote Link to post Share on other sites
Phil Read Posted January 11, 2021 Author Report Share Posted January 11, 2021 Thanks, I have it up on stands at the rear so I will level it up with stands under the front. Quote Link to post Share on other sites
Phil Read Posted January 19, 2021 Author Report Share Posted January 19, 2021 (edited) I have the floor out and notice that between the chassis outrigger and the inner sill floor mounts there is a fibre pad about 5mm thick. Is this a factory part? I cannot see any reference in the parts book. Edited January 19, 2021 by Phil Read error Quote Link to post Share on other sites
stuart Posted January 19, 2021 Report Share Posted January 19, 2021 12 minutes ago, Phil Read said: I have the floor out and notice that between the chassis outrigger and the inner sill floor mounts there is a fibre pad about 5mm thick. Is this a factory part? I cannot see any reference in the parts book. Items marked 42 here https://www.moss-europe.co.uk/shop-by-model/triumph/tr2-4a/body-chassis/chassis-subframes/chassis-frame-tr2-3a-1953-62.html Stuart Quote Link to post Share on other sites
Phil Read Posted January 20, 2021 Author Report Share Posted January 20, 2021 doooo! I was looking at the mountings on the body page. Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.