Eddie Trickett Posted December 10, 2020 Report Share Posted December 10, 2020 I cannot find any details of how to connect the throttle cable to the carburettors. I suspect I may be missing bracket(s) . The 2 carbs are linked together but the is no obvious way of connecting a cable to them. Can anyone point me to photos, diagrams etc to help out. Many thanks Eddie Quote Link to post Share on other sites
Tom Fremont Posted December 10, 2020 Report Share Posted December 10, 2020 Hi Eddie, This will need the advice of those who have converted to RHD as I suppose you have done. Plenty of TR6s with RHD have been converted to dual S.U.s so they have worked it out. Originally no cable was used on the TR250; the linkage was all hard: http://trf.zeni.net/TR6-TR250GB/120.php#navbar Cheers, Tom Quote Link to post Share on other sites
250 Posted December 10, 2020 Report Share Posted December 10, 2020 Hi Eddie, Mine is still LHD but I fitted a RATCO (US company) cable conversion works well Speak to Bob https://www.rat-co.com Mark. Quote Link to post Share on other sites
Nigel A Posted December 10, 2020 Report Share Posted December 10, 2020 Hi Eddie i used the mechanism from a big saloon (can’t remember the correct terminology or model) This was bolted to the carb using a bracket I made up. ive attached some pictures , but cannot find one of it installed. If you like I can photograph it tomorrow Nigel Quote Link to post Share on other sites
Eddie Trickett Posted December 11, 2020 Author Report Share Posted December 11, 2020 Thanks for the replies everyone. I have also tried phoning a few dealers but no joy. Nigel if you could get a photo of the installation that would be good. What is your last photo? Thanks Eddie Quote Link to post Share on other sites
Nigel A Posted December 11, 2020 Report Share Posted December 11, 2020 Hi Eddie just taken a couple of quick photos, hope they help. If you want any more pictures or info let me know. Nigel Quote Link to post Share on other sites
Eddie Trickett Posted December 23, 2020 Author Report Share Posted December 23, 2020 Nigel , thanks for the photos. I have bought some brackets and linkages off ebay for a Triumph 2500 which look very similar so I should be able to sort it out. Eddie Quote Link to post Share on other sites
Nigel A Posted December 25, 2020 Report Share Posted December 25, 2020 Hi Eddie The only problem I had was clearing the steering column, so the mounting bracket I made up took a fair bit of adjustment before everything was in the right position. Merry Christmas Nigel Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.